| Customization: | Available |
|---|---|
| Task: | Program |
| Structure: | Combination |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1,Profinet bus communication rate 100Mbps,the maximum communication distance up to 100m between two slave module(100BASE-TX).
2,The topological structure support star,tree,linear,ring structure.
3,Each slave module allow to extend 8 I/O module(digital module,analog module,temperature module,PID module.but CAN module,motion control module,weighting module are not include).
4,Support Siemens Profinet master station,Siemens S7-300,Siemens S7-1200,Siemens S7-1500.Support Modbus RTU,PPI,Mitsubishi,Omron,Delta protocol.
5,Programming software TIA Portal V13 and above version.
Technical
|
Physical Features |
|
|
Dimension(W×H×D) |
71×80×62 mm |
|
Power Consumption |
|
|
Rated voltage input |
24V DC |
|
Voltage range |
20.4V~28.8V DC |
|
Current input |
0.8A |
|
Bus power voltage |
+5V DC |
|
Bus power current |
1.1A |
|
Isolation |
The external power supply is isolated from the system power supply |
|
Power protection |
provides reverse connection protection and surge absorption |
|
LED Indicator |
|
|
24V Indicator(Green) |
ON = 24VDC power |
|
OFF = 24VDC no power |
|
|
SF Indicator(red) |
ON = extend I/O Bus failure or PROFINET module failure |
|
OFF = no fault |
|
|
BF Indicator(red) |
ON = PROFINET Bus communication failure (no connection to switch, no network detected) |
|
Blinking=Hardware configuration is inconsistent |
|
|
OFF = no fault |
|
|
MT Indicator(yellow) (maintenance indicator ) |
ON = Loss of synchronization |
|
OFF = no fault |
|
|
P1R/P2Rport Indicator(green) |
ON = There is a connection to the switch /PN master station |
|
OFF = There is no a connection to the switch /PN master station |
|
|
P1R/P2RportIndicator(yellow) |
ON = received data |
|
OFF = no received data |
|
|
Expansion I/O |
|
|
Maximum support module |
8(digital module,analog module,temperature module and PID module,other moudle is not included) |
|
Protocol |
CTSC-200 PLC 4MHZ Bus protocol |
|
Maximum IO each station |
Analog IO up to 64AI/32AQ Digital IO up to 256DI/256DQ |
|
Topological structure |
support star,tree,linear,ring structure. |
|
PROFINET port |
|
|
Communication port |
1*dual RJ45 port |
|
Data transmission rate |
Ethernet speed rate 10Mbps |
|
PROFINET speed rate100Mbps |
|
|
Support Ethernet |
ping,arp,(SNMP)/MIB-2,LLDP |
|
Send |
250us~4ms |
|
The third partPROFINET master station |
Support |
|
Maximum distance |
100m(100BASE-TX) |
|
Topological structure |
support star,tree,linear,ring structure. |
|
Isolation |
Communication port isolation |
|
Hardware configuration function |
|
|
File type |
PROFINET GDS file XML format |
|
The third partPN master station |
Add CTS7 277-0PN32 then support 8pcs expansion model |
|
digital module,analog module,temperature moduleand PID module,other moudle is not included |
|
| Environmental condition | |
| Temperature | -40ºC ~+70ºC |
| Humidity | 10%~95% no condensation |
| Electromagnetic compatibility | |
| Electrostatic discharge IEC61000-4-2 |
Contact discharge: ±4KV Air discharge: ±8KV |
| Electrical fast transient pulse train IEC61000-4-4 |
Power line: 2KV, 5KHz Signal line: 2KV, 5KHz (I/O coupling clamp ) 1KV, 5KHz (communications coupling clamp ) |
| Surge IEC61000-4-5 | Power line: 2KV(asymmetry), 1KV(symmetry) |
| Radiofrequency electromagnetic radiation IEC61000-4-3 |
80MHz~1GHz, 10V/m, 80%AM (1KHz ) |
| Radiofrequency field inductively conducts interference IEC61000-4-6 |
0.15MHz~80MHz, 10V/m, 80%AM (1KHz ) |
| DC power input port short - term interruption and voltage variation IEC61000-4-29 |
Interruption time: 10ms |
| Run in high temperature IEC60068-2 Run in low temperature IEC60068-2 |
65ºC, stay time: 24h, temperature change rate≤1ºC/min, recovery time≥1h -20ºC, stay time: 24h, temperature change rate≤1ºC/min, recovery time≥1h |
| Start in high temperature IEC60068-2 Start in low temperature IEC60068-2 |
65ºC, 2h, not boot 3 times after temperature stable -20ºC, 2h not boot 3 times after temperature stable |
| Cycle operation both high and low temperature IEC60068-2 |
-10ºC~60ºC stay time:3h temperature change rate 1ºC/min, 5 loop, recovery time 1h |
| Store in high temperature IEC60068-2 Store in low temperature IEC60068-2 |
75ºC, stay time: 72h temperature change rate≤1ºC/min, recovery time≥1h -40ºC, stay time: 72h temperature change rate≤1ºC/min, recovery time≥1h |
| Hot and cold shock IEC60068-2 | -40ºC~75ºC, stay time: 3h, temperature change time: 2min, 3 loops |
| Stable high humidity IEC60068-2 | Store temperature: 40ºC, stay time: 48h, store humidity: 93% |
| Alternate damp and hot IEC60068-2 |
25ºC~55ºC, humidity: 95%, single loop: 24h, 2 loops |
| Sine shake(bare) IEC60068-2 | 5~150Hz, 0.05G2/Hz 150Hz~500Hz, -3dB/oct, 1h/axis, X, Y, Z 3 axes in all |
| Mechanical shake(bare) IEC60068-2 | 15G, 11ms pulse, 3 times/direction |
| Fall | 1m, 10 times, package |
Q1.What's the payment term?
A. We accept TT,LC,Western Union,Paypal.
Q2.What is the delivery time?
A. It depends on order quantity,usually it will take about 3-5 days for sample production.
Q3.What's the package used for?
A. For the small capacity,will use carton,but for big capacity,we should use honeycomb carton and pallet or wooden case for protection.
Q4.Would you accept to use our logo?
A.It's no problem,we accept OEM service.
Q5.What's your production capacity for one month?
A. Our month capacity can reach near 500-3000pcs for the most of our model.
Q6.Where is your market?
A. Our products are popular in Australia,South America,Philippines,Italy, America, Pakistan and so on.Some of them are our regular customers and some of them are developing. We hope you can join us and make mutural benifit from our cooperation.
Q7. What kind of certificates you have?
A. Our company has ISO9001,CE, RoHS,SGS etc.
OEM Services
Logo
Please offer us your own high resolution logo in JPG format,there should be two colors at most in the logo and there should be no gradient effect in the logo.
2. Label
Please offer us your own model numbers.
Lead Time
1.Sample orders will be delivered from our factory within 3-5 working days.
2.General orders will be delivered from our factory within 7-15 working days.
3.Large orders will be delivered from our factory within 45 working days at most.
Shipment
1.By EMS,DHL,FedEx,TNT,UPS or other Express.
2.By our forwarding agent(by Air or by Sea).
3.By your own forwarding agent.
){kind=link}