Cth2 214-1ba33-0X24, 2A, 1*Ppi Port, 1*Free Port, 1*Ethernet Port. Support Analog Expansion Board, Do Not Support Expansion Module, Cotrust PLC

Product Details
Customization: Available
Task: Program
Structure: Combination
Manufacturer/Factory

360° Virtual Tour

Diamond Member Since 2018

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Registered Capital
2000000 RMB
Plant Area
>2000 square meters
  • Cth2 214-1ba33-0X24, 2A, 1*Ppi Port, 1*Free Port, 1*Ethernet Port. Support Analog Expansion Board, Do Not Support Expansion Module, Cotrust PLC
  • Cth2 214-1ba33-0X24, 2A, 1*Ppi Port, 1*Free Port, 1*Ethernet Port. Support Analog Expansion Board, Do Not Support Expansion Module, Cotrust PLC
  • Cth2 214-1ba33-0X24, 2A, 1*Ppi Port, 1*Free Port, 1*Ethernet Port. Support Analog Expansion Board, Do Not Support Expansion Module, Cotrust PLC
  • Cth2 214-1ba33-0X24, 2A, 1*Ppi Port, 1*Free Port, 1*Ethernet Port. Support Analog Expansion Board, Do Not Support Expansion Module, Cotrust PLC
Find Similar Products
  • Overview
  • Product Description
  • Company Profile
  • FAQ
Overview

Basic Info.

Model NO.
CTH2 214-1BA33-0X24
Function
Automatic Control
Certification
RoHS, ISO: 9001, CE
Condition
New
Customized
Customized
Weight
0.45kg
Input Number of Points
14di
Output Points
10do
Power Dissipation
7W
Transport Package
CTN
Specification
137*80*62mm
Trademark
COTRUST
Origin
China
HS Code
853710119
Production Capacity
5, 000 Pieces/Year

Product Description

 

Product Description
Cth2 214-1ba33-0X24, 2A, 1*Ppi Port, 1*Free Port, 1*Ethernet Port. Support Analog Expansion Board, Do Not Support Expansion Module, Cotrust PLC

Order No.: CTH2 214-1BA33-0X24
Specification: CPU H224 basic:12KB program memory/8KB data memory,220VAC power supply,14DI*10DO relay  output,2A,1*PPI,1*FPORT,1*Ethernet port,expansion module and expansion board are not supported.


Performance Parameters

Physical Features 
Dimension(W×H×D) 137×80×62mm
Power dissipation 7W
Memory Features
Program memory 8KB+4KB
Data memory 8KB
General Features 
Timers total
      1ms
      10ms
      100ms
256
4
16
236
Counters total 256
Internal memory bits 256
Stored permanently on power down Data permanent stored
Sequential control relay (S) 256
Time Interrupts 2 with 1ms resolution 
Edge Interrupts 4 rising edges and/ or 4 falling edges 
Analog adjustment Non
Boolean execution speed 0.22µs
Float execution speed 12µs
Clock  embedded ,precision ±120s/m
BD expansion board interface number 1
System indicator 3,STOP,RUN,SF
RUN/STOP dial code  Yes,2
Programming card Support
Memory card Non Support
Rated input voltage 24VDC
Power supply
Native and extended bus+5V
+24V
 
660mA
200mA
Integrated Communication Function
Communication Interface  2 communication ports ,PORT0:PPI/Free port,RS485;FPORT0:PPI/Free port,RS485
 
PPI baud rates(baud) 9.6k,19.2k and 187.5k
Freeport baud rates(baud) 1.2k ~ 115.2k
Maximum cable length
    Isolated repeater applied
    Isolated repeater unapplied
When it is 1000 m, baud rate is 187.5k; when it is 1200 m, 38.4k.
50m
Maximum number of stations  32 stations per segment,126 stations per network 
Maximum number of masters 32
Physical interface 2 RS485 port
Isolation Non
Ethernet Function
Communication port 1 Ethernet port
Communication standard IEEE802.3 standard
Communication speed 10Mbps and 100Mbps self-adaption
Adaptive cross connection Non support
Interface to industrial Ethernet(10/100Mbps) RJ45 port
Protocol type UDP/TCP protocol
Support MICO Ethernet programming, support Ethernet communication between PLC.
Collocation method Support the upper computer through the Ethernet port search PLC,
 support the mouth download system configuration.
Max Connections  Each PLC supports up to 8 UDP connections and up to
4 TCP connections.
The maximum number of IT connections 8 UDP_PPI connections, with 4 master stations and 
4 slave stations.
4 ModBus_TCP connections, 2 master stations and 
2 slave stations.
User data number Up to 200 bytes are used for TCP/IP transmission.
Up to 240 bytes are used for ModBus_TCP transport.
Port local:1~65535
remote server:8888
Boot time or restart time after reset 3 seconds
Indicator lamp Green RMC indicator: on: remote control in effect, 
off: remote control out

Green Ethernet indicator: on: connection, flicker: transmission; 
out: not connected
Maximum cable length 100m
Isolation Communication port isolation
I/O Features
Number of integrated digital inputs 14
Input type Sink/Source
Number of integrated digital outputs 10
Output type Relay dry connect
Digital I/O mapping domain 128DI/1280DQ
Analog I/O mapping domain 32AI/32AQ
Maximum number of expandable I/O module 7
Maximum digital I/O configuration IO:256(128DI/128DO)
Maximum analog I/O configuration 64(32AI/32AQ)
Pulse catch inputs 14
High-speed counters
    Total 
     Uniphase counters 
     Bi-phase counters 
 
4
4×50KHz
1×30KHz
Digital Input Features
Number of integrated digital input 14
Input type Sink/ Source
Rated voltage 24V DC
Input voltage range 20.4-28.8V DC
Surge voltage 35V DC,continuously 0.5s
Logical 1 Signal (minimum)
Logical  0 Signal (Maximum)
15 VDC,2.5mA
5 VDC,1mA
Allowable leakage current 1mA
Input filter 3.4ms and 6.4ms
Isolation(field side to logical circuit) 500V AC,1min
Simultaneous input 14
Maximum cable length
Shielded
Unshielded
500 M(standard input)
50 M(high-speed counters input)
300 M(standard input)
Digital Output Features 
Number of integrated digital output 10
Output type Relay dry connect
Rated voltage  24VDC or 110V/220VAC
Output voltage range 5~30VDC:5~250VAC
Logical 1 Signal (minimum) -
Logical  0 Signal (Maximum)  -
Rated current per point 2A
Rated current for each common point 8A
Leakage current (maximum) -
Surge current(Maximum)  7A
Lamp load (maximum) 30W DC/200W AC
On resistance (contact) 0.2Ω
Isolation(field side to logical circuit)
 
-
Delay Off to on:-
on to off:-
Contact life at rated load 100000 times on and off
Simultaneous input All output point
Parallel output Non
Maximum cable length
Shielded
Unshielded
500m
150m



RS485 communication port definition

Connector

PIN

PORT0(RS485)

FPORT0(RS485)

 Cth2 214-1ba33-0X24, 2A, 1*Ppi Port, 1*Free Port, 1*Ethernet Port. Support Analog Expansion Board, Do Not Support Expansion Module, Cotrust PLC

1

    Shell Grounded

 Shell Grounded

2

logically

logically

3

RS485+signal B

RS485+signal B

4

Send the application RTS

Send the application RTS

5

 logically

 logically

6

+5V, series connection 100 Ω resistance

+5V, series connection 100 Ω resistance

7

+24V

+24V

8

RS485-signal A

RS485-signal A

9

NC

NC

shell 

 Shell Grounded

 Shell Grounded

Cth2 214-1ba33-0X24, 2A, 1*Ppi Port, 1*Free Port, 1*Ethernet Port. Support Analog Expansion Board, Do Not Support Expansion Module, Cotrust PLC
Company Profile
Cth2 214-1ba33-0X24, 2A, 1*Ppi Port, 1*Free Port, 1*Ethernet Port. Support Analog Expansion Board, Do Not Support Expansion Module, Cotrust PLC
Cth2 214-1ba33-0X24, 2A, 1*Ppi Port, 1*Free Port, 1*Ethernet Port. Support Analog Expansion Board, Do Not Support Expansion Module, Cotrust PLCCth2 214-1ba33-0X24, 2A, 1*Ppi Port, 1*Free Port, 1*Ethernet Port. Support Analog Expansion Board, Do Not Support Expansion Module, Cotrust PLCCth2 214-1ba33-0X24, 2A, 1*Ppi Port, 1*Free Port, 1*Ethernet Port. Support Analog Expansion Board, Do Not Support Expansion Module, Cotrust PLCCth2 214-1ba33-0X24, 2A, 1*Ppi Port, 1*Free Port, 1*Ethernet Port. Support Analog Expansion Board, Do Not Support Expansion Module, Cotrust PLCCth2 214-1ba33-0X24, 2A, 1*Ppi Port, 1*Free Port, 1*Ethernet Port. Support Analog Expansion Board, Do Not Support Expansion Module, Cotrust PLCCth2 214-1ba33-0X24, 2A, 1*Ppi Port, 1*Free Port, 1*Ethernet Port. Support Analog Expansion Board, Do Not Support Expansion Module, Cotrust PLCCth2 214-1ba33-0X24, 2A, 1*Ppi Port, 1*Free Port, 1*Ethernet Port. Support Analog Expansion Board, Do Not Support Expansion Module, Cotrust PLCCth2 214-1ba33-0X24, 2A, 1*Ppi Port, 1*Free Port, 1*Ethernet Port. Support Analog Expansion Board, Do Not Support Expansion Module, Cotrust PLC
FAQ
 

Q1.What's the payment term? 
A. We accept TT,LC,Western Union,Paypal.

Q2.What is the delivery time?
A. It depends on order quantity,usually it will take about 3-5 days for sample production.

Q3.What's the package used for?
A. For the small capacity,will use carton,but for big capacity,we should use honeycomb carton and pallet or wooden case for protection.

Q4.Would you accept to use our logo?
A.It's no problem,we accept OEM service.

Q5.What's your production capacity for one month?
A. Our month capacity can reach near 500-3000pcs for the most of our model.

Q6.Where is your market?
A. Our products are popular in Australia,South America,Philippines,Italy, America, Pakistan and so on.Some of them are our regular customers and some of them are developing. We hope you can join us and make mutural benifit from our cooperation.

Q7. What kind of certificates you have?
A. Our company has ISO9001,CE, RoHS,SGS etc.

 

OEM Services
Logo
Please offer us your own high resolution logo in JPG format,there should be two colors at most in the logo and there should be no gradient effect in the logo.
2. Label
Please offer us your own model numbers.

Lead Time
1.Sample orders will be delivered from our factory within 3-5 working days.
2.General orders will be delivered from our factory within 7-15 working days.
3.Large orders will be delivered from our factory within 45 working days at most.

Shipment
1.By EMS,DHL,FedEx,TNT,UPS or other Express.
2.By our forwarding agent(by Air or by Sea).
3.By your own forwarding agent.

 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier