Ctsi-H312-16n1, Simple Series PLC CPU Supporting 16-Axis Ethercat Motion Control, 8di/8do NPN, Dual Ethernet Ports and Multiple Communication Protocols.

Product Description

 

Product Description

Model	CTSI-H312-16N1
Power Supply Specifications
Rated Input Voltage	24V DC(20.4V~28.8V)
Rated Input Current	1A
Input Power Protection	Supports polarity reverse connection protection
Local Hardware Specifications
Dimensions(W×H×D)	53×104×80 mm
Digital Inputs	8DI
Digital Outputs	8DO
Bus Interface	1
Ethernet	1
EtherCAT	1
RS485	Supports up to 5 channels (1 on main unit, 2 via expansion cards)
TypeC	1
Expansion Card Slots	2
Memory Specifications
Program Capacity	256K Byte
Data Capacity	1M Byte(DB can address 1M data space)
Non-volatile Memory Space	160K Byte(V:64KB,M:64KB,DB:32KB)
Program Organization Units	Max. 1024 OB+FC+FB, each block up to 64KB
Expansion Capabilities
Expansion Modules	16 (All simple series modules expandable from main unit)
Expansion Cards	Supports analog, CAN, RTC, serial port
Programming Software Specifications
Software Version	MagicWorks PLC (V2.32 or above)
Programming Languages	LAD/STL/C language
Instruction Cycle
Logic Instructions	0.086us
Floating-point Instructions	1.4us
Motion Control
EtherCAT Axes	16
Axis Control Capability	4 Axes/1ms
Pulse Axes	4
Input Specifications - Hardware Parameters
Number of Input Points	8
Input Type	Sinking/Sourcing
Rated Load Input Voltage	24V DC( 20.4V~28.8V DC )
Maximum Load Cable Length	Shielded - 500m (Standard Input), 50m (High-Speed Counter Input) Unshielded - 300m (Standard Input)
Logic 1 (Min)	15V DC,>2.5mA
Logic 0 (Max)	5V DC,<1mA
Input Filter	Configurable; supports 0.2μs, 0.4μs, 0.8μs, 1.6μs, 3.2μs, 6.4μs, 12.8μs, 0.2ms, 0.4ms, 0.8ms, 1.6ms, 3.2ms, 6.4ms, 12.8ms; default is 6.4ms
Software Function	Supports hardware reconfiguration in the program without modifying the software logic when a point is damaged.
Protection Function	Surge Voltage -35V DC, lasting 0.5s
Maximum Allowed Leakage Current	1mA
Isolation	500V AC,1 minute
Input Specifications - HSC Parameters
Number of Input Channels	4
Single-Phase Counter	4×200KHz
Two-Phase Counter	4×100KHz
Function Description	Supports arbitrary modification of points and internal pulse capture.
Output Specifications - Hardware Parameters
Number of Output Points	8
Output Type	Transistor Sinking Output
Rated Output Voltage	24V DC(20.4~28.8V DC)
Rated Output Current	0.5A
Output Load	Resistive Load - 0.5A per point, 2A for 8 points Inductive Load - 7.2W per point, 24W for 8 points Lighting Load - 5W per point, 18W for 8 points
Output Frequency	Resistive Load - 200KHz Inductive Load - 0.5Hz Lighting Load - 10Hz
Off to On (Delay) On to Off (Delay)	<0.2us <2us
Maximum Residual Voltage (ON) Leakage Current (OFF)	<0.5V DC <30uA
Maximum Load Cable Length	Shielded - 500m Unshielded - 150m
Software Function	Supports hardware reconfiguration in the program without modifying the software logic when a point is damaged.
Protection Function	Short-circuit protection, overcurrent protection
Isolation	500V AC,1 minute
Output Specifications - HSP Parameters
Number of Output Channels	4 (Pulse/Direction)
Output Frequency	200KHz
Function Description	Supports arbitrary modification of points and group pulse axes; supports pulse/direction output delay and optional direction.
Output Specifications - PWM Parameters
Number of Output Channels	4
Output Frequency	10Hz~20KHz
Period	50~100000us
Duty Cycle	0.00~1.00 (2 decimal places)
Function Execution Result	Duty Cycle        Result   1          100% duty cycle, continuous ON output   0          0% duty cycle, continuous OFF output
Communication Interface - Ethernet
Number of Interfaces	1
Baud Rate	10/100Mbps Auto-Negotiation
Supported Protocol Types	UDP_PPI Protocol Modbus TCP/IP Master/Slave Protocol S7 Master/Slave Protocol CTNET Socket PN Slave Function OPC UA MQTT
Protocol Support Quantity	Total connections ≤ 64 UDP_PPI: Max 8 connections Modbus TCP/IP Master/Slave: Supports data reading from up to 32 slaves; default Ethernet port is slave S7 Master/Slave: 8 connections, no master/slave distinction CTNET: Supports 64 slaves Socket: Supports 32 UDP and 32 TCP connections
Protocol Corresponding Data Transmission Size	UDP_PPI: 200 bytes Modbus TCP/IP: Only one data transmission at a time, 240 bytes S7 Master: 200 bytes CTNET: Master supports 64K slave data reading; slave supports 10K data transparent transmission Socket: 512 bytes
Local Monitoring/Local Programming Function	Supported
Remote Monitoring/Remote Programming Function	Supported
Maximum Cable Length per Segment	100m
Isolation	Communication port isolation
Software Function	Supports switch functionality with EtherCAT
Communication Interface - EtherCAT
Number of Interfaces	1
Baud Rate	100Mbps
Maximum Cable Length per Segment	100m
Number of Slaves	72
Supported Functions	Supports distributed clock configuration Supports startup parameter configuration Supports PDO parameter configuration and mapping Supports configuration of bus cycle period Supports startup check for vendor ID and product ID Supports slave scanning Supports slave station masking
Communication Interface--RS485
Number of Interfaces	Supports up to 5 channels (1 on main unit, 2 expandable via expansion cards)
PPI Baud Rate	9.6Kbps,19.2Kbps,187.5Kbps
Free Baud Rate	1.2Kbps~115.2Kbps; built-in Modbus RTU master/slave functionality
Maximum Cable Length per Segment	With isolated repeater: 1000m (187.5Kbps),                         1200m (38.4Kbps) Without isolated repeater: 50m
Isolation	Communication port isolation
Number of Slaves per Channel	32 stations per segment MPI connection: one MPI slave can connect to up to 8 MPI masters Point-to-point (PPI master mode, NETR/NETW): each instruction reads/writes up to 200 bytes, with up to 8 read/write instructions allowed simultaneously
Hardware Interface--TypeC
Supported Functions	Updates programs and firmware via USB flash drive Directly downloads and updates programs via TYPE-C interface Supports power supply through TYPE-C interface
Hardware Interface - Expansion Card Slot Supported Models CTSI-485/48
CTSI-485/485/RTC-E1	Two of this type can be expanded, regardless of slot Each card can expand 2 additional RS485 interfaces, supports free protocol, and Modbus RTU master/slave functionality
CTSI-485/CAN-E1	One of this type can be expanded, regardless of slot Expands 1 RS485 interface, supports free protocol and Modbus RTU master/slave Expands 1 CAN interface, supports Canopen master protocol (expandable to 32 slaves) and CANFree protocol
CTSI-AMS03-E2	Two of this type can be expanded, regardless of slot Each card can expand 2AI*12bit, 1AQ*12bit
CTSI-RTC-E1	One of this type can be expanded, regardless of slot Expands RTC clock, clock accuracy: ±120 seconds/month
LED Indicator Characteristics
PWR Indicator	Green	ON = 24VDC power supply normal, OFF = No 24VDC power supply
SF Indicator	Red	ON = System fault, OFF = No fault
BF Indicator	Red	ON = Bus fault, OFF = No fault
RMC Indicator	Green	ON: CPU and remote server communication successful (EtherNET communication port parameters correctly configured)
		OFF: CPU and remote server communication failed or prohibited
RUN Dual-Color Indicator	Green	ON = System running, OFF = System stopped
	Yellow	ON = System stopped, OFF = System running
RJ45 Indicator	Green	ON = Connected, OFF = Not connected
	Yellow	ON = 100Mbps,OFF = 10Mbps
Digital Input Indicator	Green	ON = Signal input, OFF = No signal input
Digital Output Indicator	Green	ON = Signal output, OFF = No signal output
PB Indicator	Green	ON = Expansion bus power supply normal, OFF = No expansion bus power supply
Power-On Indicator Status	Before CPU operation: PWR light on, others (SF, BF, RMC, RUN) off
	After CPU operation: PWR light on, RUN green light on, others (SF, BF, RMC, RUN yellow) off

 

 

Product Parameters

 

 

Company Profile

 

FAQ

Q1.What's the payment term?
A. We accept TT,LC,Western Union,Paypal.

Q2.What is the delivery time?
A. It depends on order quantity,usually it will take about 3-5 days for sample production.

Q3.What's the package used for?
A. For the small capacity,will use carton,but for big capacity,we should use honeycomb carton and pallet or wooden case for protection.

Q4.Would you accept to use our logo?
A.It's no problem,we accept OEM service.

Q5.What's your production capacity for one month?
A. Our month capacity can reach near 500-3000pcs for the most of our model.

Q6.Where is your market?
A. Our products are popular in Australia,South America,Philippines,Italy, America, Pakistan and so on.Some of them are our regular customers and some of them are developing. We hope you can join us and make mutural benifit from our cooperation.

Q7. What kind of certificates you have?
A. Our company has ISO9001,CE, RoHS,SGS etc.
 

OEM Services
Logo
Please offer us your own high resolution logo in JPG format,there should be two colors at most in the logo and there should be no gradient effect in the logo.
2. Label
Please offer us your own model numbers.

Lead Time
1.Sample orders will be delivered from our factory within 3-5 working days.
2.General orders will be delivered from our factory within 7-15 working days.
3.Large orders will be delivered from our factory within 45 working days at most.

Shipment
1.By EMS,DHL,FedEx,TNT,UPS or other Express.
2.By our forwarding agent(by Air or by Sea).
3.By your own forwarding agent.