| Customization: | Available |
|---|---|
| Task: | Program |
| Structure: | Combination |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Order Number | CTSI-AIT04-S1 | CTSI-AIR04-S1 |
| Physical Characteristics | ||
| Dimensions(W×H×D) | 12 x 104 x 80 mm | |
| IP Rating | IP20 | |
| Module Hot-swappable Function | Not supported | |
| Power Supply Specifications | ||
| Rated Input Voltage | 24V DC(20.4V~28.8V DC) | |
| Input Power Protection | Supports reverse polarity protection | |
| LED Indicator Characteristics | ||
| Note 1: Blinking: Flashes once every 200 milliseconds. | ||
| PR Indicator | Green | ON = 24VDC power supply and bus power supply normal |
| Blinking = 24VDC power supply abnormal, bus power supply normal | ||
| OFF = Bus power supply abnormal | ||
| SF Indicator | Red | ON = Mismatch in module configuration (e.g., incorrect address assignment, inconsistent configuration, module not detected) |
| Blinking = Input signal fault (e.g., disconnection) | ||
| OFF = No fault | ||
| Channel Indicator | Green | ON = Channel enabled |
| OFF = Channel disabled | ||
| Input Type | Thermocouple | Resistance Thermometer (RTD) |
| Number of Input Points | 4 | 4 |
| Connection Method | - | Supports 2-wire, 3-wire; default: 3-wire |
| Input Range | B,E,N,J,K,R,S,T :±80mV :K |
Pt100,Pt500,Pt1000(α=3850ppm,3920ppm,3850.55ppm,3916ppm,3902ppm),Cu100,NTC5K,NTC10K(B=3435,3950) :Pt100Ω(α=3850ppm) |
| Common-mode Rejection | >100dB@120V AC | |
| Input Resolution | ||
| Temperature | 0.1ºC/0.1ºF | 0.1ºC/0.1ºF |
| Voltage | 15bit + sign bit | - |
| Resistance | - | 15bit + sign bit |
| Sampling Period | 100ms / 4 channels | |
| Filter Period | 100ms, 200ms, 500ms, 1s, 5s / 4 channels | |
| Default: 500ms | ||
| Maximum Lead Length to Sensor | Max. 100m | |
| Lead Loop Resistance | 100Ω | 20Ω, Cu type 2.7Ω |
| Noise Rejection | 85dB@50Hz/60Hz/400Hz | |
| Data Word Format | Voltage: -27648 ~ +27648 | Resistance: -27648 ~ +27648 |
| Input Impedance | >1MΩ | >1MΩ |
| Maximum Input Voltage | Miswiring up to 30V DC supported with error indication | |
| Basic Error | 0.1% Fs (voltage) | 0.1% Fs (resistance) |
| Repeatability | 0.05%Fs | |
| Cold Junction Compensation | Built-in cold junction compensation | - |
| Configurable; cold-junction compensation is enabled by default. | ||
| Cold Junction Error | ±1.5ºC | - |
| Configuration | ||
| Channel | Configurable, all enabled by default | |
| Temperature Unit | Configurable (°C / °F), default: °C | |
| Wire-break Detection | Configurable, wire-break detection enabled by default; | Not configurable, wire-break detection always enabled; |
| Supports positive/negative calibration, default: positive calibration | Supports positive/negative calibration, default: positive calibration | |
| Isolation | ||
| Field-to-logic | 500V AC | |
| Field-to-24VDC | 500V AC | |
| 24VDC-to-logic | 500V AC | |
| Between interface channels | Non-isolated | |
| Diagnostics | ||
| Wire-break | 32767 (positive calibration), -32768 (negative calibration) | |
| No module power | 32766 | |
Performance Parameters
Q1.What's the payment term?
A. We accept TT,LC,Western Union,Paypal.
Q2.What is the delivery time?
A. It depends on order quantity,usually it will take about 3-5 days for sample production.
Q3.What's the package used for?
A. For the small capacity,will use carton,but for big capacity,we should use honeycomb carton and pallet or wooden case for protection.
Q4.Would you accept to use our logo?
A.It's no problem,we accept OEM service.
Q5.What's your production capacity for one month?
A. Our month capacity can reach near 500-3000pcs for the most of our model.
Q6.Where is your market?
A. Our products are popular in Australia,South America,Philippines,Italy, America, Pakistan and so on.Some of them are our regular customers and some of them are developing. We hope you can join us and make mutural benifit from our cooperation.
Q7. What kind of certificates you have?
A. Our company has ISO9001,CE, RoHS,SGS etc.
OEM Services
Logo
Please offer us your own high resolution logo in JPG format,there should be two colors at most in the logo and there should be no gradient effect in the logo.
2. Label
Please offer us your own model numbers.
Lead Time
1.Sample orders will be delivered from our factory within 3-5 working days.
2.General orders will be delivered from our factory within 7-15 working days.
3.Large orders will be delivered from our factory within 45 working days at most.
Shipment
1.By EMS,DHL,FedEx,TNT,UPS or other Express.
2.By our forwarding agent(by Air or by Sea).
3.By your own forwarding agent.
){kind=link}