| Customization: | Available |
|---|---|
| Task: | Program |
| Structure: | Combination |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
CTSC-200 series is a new generation of high-performance PLC with high cost-effective,excellent performance,multi-protocol communication ports and a abundant instruction,which can apply to various of industries and adapt to the complex control requirements of small and medium control system.
Powerful communication capability
Ethernet communication mode:10/100Mbps Ethernet support MODBUS_TCP and UDP_PP protocol.Multiple host networking communication in the LAN, to programming, debugging and remote monitoring in the WAN.
PPI communication mode:CTSC-200 series CPU integrated 1-2 PPI port which hardware interface is the RS485 or RS232,provide communication rate 9.6Kbps,19.2Kbps,187.5Kbps,PPI is token-ring network structure,can form PPI network without relay,to complete data exchange through NETR and NETW,each exchange package can be up to 200bytes,each CPU can connect eight modules,that is each CPU can connect to 8 PC or other CPU.
If the I/O of some system is relatively too large that one CPU can not meet requirement,can achieve by several CPU,multi-CPU structure can achieve distributed control thant with high sstem reliability.The data exchange is extremely fast and convenient because of the powerful communication capability among different CPUs.
MPI communication mode:CTSC-200 series CPU can connect to the MPI network,communication rate 19.2Kbps,187.5Kbps which only work as slave station in the MPI network.The different slave stations can not communication each other while the master stations can read the data of slave station.
Profibus-Dp or Ethernet communication mode:CPU can be connected to the Profibus field by by DP slave stations,as salve station of certain master station,it can exchange data fast and real-time also can run independently which with high reliability.
CPU can be connected with industrial Ethernet by Ethernet module which is suitable for building control or other applications with several stations.
CANopen communication mode:To form network through CAN communication,each CAN master station can connect 32 CAN slave stations or devices,baud rate up to 1MBit/s within 25m,baud rate up to 20MBit/s within 2500m.
Freeport communication mode:CPUs provide 1-2 freeport,embedded several free communication protocol library such as Modbus,USS etc.
CPU 226L,CPU226H with two freeport can communicate simultaneously so as to meet the requirements of such occasions like high-speed communication ,synchronous control,many peripherals.
Performance Parameters
|
Physical Features |
|
|
Dimension(W×H×D) |
137×80×62mm |
|
Power dissipation |
7W |
|
Memory Features |
|
|
Program memory |
12KB+4KB |
|
Data memory |
8KB+100KB |
|
General Features |
|
|
Timers total 1ms 10ms 100ms |
256 4 16 236 |
|
Counters total |
256 |
|
Internal memory bits |
256 |
|
Stored permanently on power down |
Data permanent stored |
|
Sequential control relay (S) |
256 |
|
Time Interrupts |
2*1ms resolution |
|
Edge Interrupts |
4 rising edges and/ or 4 falling edges |
|
Analog adjustment |
Non |
|
Boolean execution speed |
≤0.15µs |
|
Float execution speed |
≤8µs |
|
Clock |
embedded ,precision ±120s/m |
|
BD expansion board interface number |
1,Support CAN expansion board, analog expansion board |
|
System indicator |
5,STOP,RUN,SF,RMC,LINK/ACT |
|
RUN/STOP dial code |
Yes,2 |
|
Battery card interface |
Support,power supply below 2V,alarm bit SM195.0 |
|
Programming card and Memory card |
Support |
|
Rated input voltage |
24VDC |
|
Power supply Native and extended bus+5V +24V |
660mA 200mA |
|
Integrated Communication Function |
|
|
Communication Interface |
2 communication ports ,PORT0:PPI/Free port,RS485;FPORT0:PPI/Free port,RS485 |
|
PPI baud rates(baud) |
9.6k,19.2k and 187.5k |
|
Freeport baud rates(baud) |
1.2k ~ 115.2k |
|
Maximum cable length Isolated repeater applied Isolated repeater unapplied |
When it is 1000 m, baud rate is 187.5k; when it is 1200 m, 38.4k. 50m |
|
Maximum number of stations |
32 stations per segment,126 stations per network |
|
Maximum number of masters |
32 |
|
Point-to-point (PPI master station mode) |
Yes(NETR/NETW), maximum 8 connections, and each connection has a maximum communication of 200 bytes |
|
MPI communication |
(1PG/1OP) 8 in total, 2 reserved |
|
Ethernet Function |
|
|
Communication port |
1 Ethernet port |
|
Communication standard |
IEEE802.3 standard |
|
Communication speed |
10Mbps and 100Mbps self-adaption |
|
Adaptive cross connection |
Non support |
|
Interface to industrial Ethernet(10/100Mbps) |
RJ45 port |
|
Protocol type |
UDP/TCP protocol Support PDP_PPI, MODBUS_TCP, Socket, S7 protocols, support PLC Ethernet communication, support MiCo Ethernet programming. |
|
Collocation method |
Support the upper computer through the Ethernet port search PLC, support the mouth download system configuration. |
|
Application interface |
Support MiCo service, UDP_PPI, Modbus_TCP, S7 protocol, Socket programming.Support Ethernet port online firmware upgrade function. |
|
Maximum number of connections |
8 UDP_PPI, no master or slave 8 Modbus_TCP, no master or slave 4 Socket connections, 2 UDP, 2 TCP 8 S7 protocol, no master and slave, COTRUST PLC only as slave station |
|
User data number |
Up to 200 bytes for UDP_PPI transmission. Up to 240 bytes are used for ModBus_TCP transmission. A maximum of 512 bytes is used for Socket transmission Up to 200 bytes for S7 transmission |
|
Port |
local:1~65535 remote server:8888 |
|
Boot time or restart time after reset |
3 seconds |
|
Indicator lamp |
Green RMC indicator: on: remote control in effect, off: remote control out Green Ethernet indicator: on: connection, flicker: transmission; out: not connected |
|
Maximum cable length |
100m |
|
Isolation |
Communication port isolation |
|
Integrated Communication Function (CANopen) - use for CAN communication board model CTH2-CAN-01S2-EB |
|||||||||||||
|
Communication Interface |
1(8 Pin) |
||||||||||||
|
Communication speed (kbps) |
1000 |
800 |
500 |
250 |
150 |
50 |
20 |
||||||
|
Maximum cable length(m) |
25 |
50 |
100 |
250 |
500 |
1000 |
2500 |
||||||
|
Maximum station address quantity |
127 |
||||||||||||
|
Station address range |
1-127 |
||||||||||||
|
Maximum number of master stations connect to slave stations |
32 |
||||||||||||
|
Collocation method |
CAN configuration blocks and EDS files |
||||||||||||
|
Maximum digital access |
Nomal IO |
CANopen IO |
|||||||||||
|
Byte |
Memory starting address |
Byte |
Memory starting address |
||||||||||
|
Input |
16 |
IB0 |
Input |
64 |
IB16 |
||||||||
|
Output |
16 |
QB0 |
Output |
64 |
QB16 |
||||||||
|
Maximum analog access |
Nomal IO |
CANopen IO |
|||||||||||
|
Channel |
Memory starting address |
channel |
Memory starting address |
||||||||||
|
Input |
32 |
AIW0 |
Input |
162 |
AIW64 |
||||||||
|
Output |
32 |
AQW0 |
Output |
162 |
AQW64 |
||||||||
|
Integrated Communication Function (CANopen) - use for CAN communication board model CTH2-CAN-01S2-EB |
|||||||||||||
|
Protocol |
CanFree |
||||||||||||
|
Use method |
Supported by internal library instructions |
||||||||||||
| I/O Features | |
| Number of integrated digital inputs | 14 |
| Input type | Sink/Source |
| Number of integrated digital outputs | 10 |
| Output type | Solid-MOSFET |
| Digital I/O mapping domain | 640DI/640DQ |
| Analog I/O mapping domain | 194AI/194AQ |
| Maximum number of expandable I/O module | 7 |
| Maximum digital I/O configuration | IO:256(128DI/128DO) |
| Maximum analog I/O configuration | 64(32AI/32AQ) |
| Pulse catch inputs | 14 |
| High-speed counters Total Uniphase counters Bi-phase counters |
6 6×30KHz 4×20KHz |
| Digital Input Features | |
| Number of integrated digital input | 14 |
| Input type | Sink/ Source |
| Rated voltage | 24V DC |
| Maximum continuous permissible voltage | 30V DC |
| Surge voltage | 35V DC,continuously 0.5s |
| Logical 1 Signal (minimum) Logical 0 Signal (Maximum) |
15 VDC,2.5mA 5 VDC,1mA |
| Isolation(field side to logical circuit) | 500V AC,1min |
| Simultaneous input | 14 |
| Maximum cable length Shielded Unshielded |
500 M(standard input) 50 M(high-speed counters input) 300 M(standard input) |
| Digital Output Features | |
| Number of integrated digital output | 10 |
| Output type | Solid-MOSFET,source |
| Rated voltage | 24VDC |
| Output voltage range | 20.4~28.8VDC |
| Logical 1 Signal (minimum) | 20VDC,max current |
| Logical 0 Signal (Maximum) | 0.1V DC,10KΩ load |
| Rated current per point | 0.75A |
| Rated current for each common point | 3.75A |
| Leakage current (maximum) | 10uA |
| Surge current(Maximum) | 8A,100ms |
| Lamp load (maximum) | 5W |
| On resistance (contact) | Typical 0.3Ω,max 0.6Ω |
| Isolation(field side to logical circuit) |
500VAC,1mins |
| Delay | Off to on:2us(Q0.0, Q0.1),---15us on to off:10us(Q0.0, Q0.1),---130u |
| High speed pulse output Maximum frequency |
Motion control library instruction: 2*50KHz Pulse (Q0.0,Q0.1),Dir (Q0.2,Q0.3) PTO/PWM: 2*20KHz (Q0.0,Q0.1) |
| Simultaneous input | All output point |
| Parallel output | Only when the outputs are in the same group |
| Maximum cable length Shielded Unshielded |
500m 150m |
RS485 communication port definition
|
Connector |
PIN |
PORT0(RS485) |
FPORT0(RS485) |
|
|
1 |
Shell Grounded |
Shell Grounded |
|
2 |
logically |
logically |
|
|
3 |
RS485+signal B |
RS485+signal B |
|
|
4 |
Send the application RTS |
Send the application RTS |
|
|
5 |
logically |
logically |
|
|
6 |
+5V,100Ω |
+5V,100Ω |
|
|
7 |
+24V |
+24V |
|
|
8 |
RS485-signal A |
RS485-signal A |
|
|
9 |
NC |
NC |
|
|
shell |
Shell Grounded |
Shell Grounded |
Q1.What's the payment term?
A. We accept TT,LC,Western Union,Paypal.
Q2.What is the delivery time?
A. It depends on order quantity,usually it will take about 3-5 days for sample production.
Q3.What's the package used for?
A. For the small capacity,will use carton,but for big capacity,we should use honeycomb carton and pallet or wooden case for protection.
Q4.Would you accept to use our logo?
A.It's no problem,we accept OEM service.
Q5.What's your production capacity for one month?
A. Our month capacity can reach near 500-3000pcs for the most of our model.
Q6.Where is your market?
A. Our products are popular in Australia,South America,Philippines,Italy, America, Pakistan and so on.Some of them are our regular customers and some of them are developing. We hope you can join us and make mutural benifit from our cooperation.
Q7. What kind of certificates you have?
A. Our company has ISO9001,CE, RoHS,SGS etc.
OEM Services
Logo
Please offer us your own high resolution logo in JPG format,there should be two colors at most in the logo and there should be no gradient effect in the logo.
2. Label
Please offer us your own model numbers.
Lead Time
1.Sample orders will be delivered from our factory within 3-5 working days.
2.General orders will be delivered from our factory within 7-15 working days.
3.Large orders will be delivered from our factory within 45 working days at most.
Shipment
1.By EMS,DHL,FedEx,TNT,UPS or other Express.
2.By our forwarding agent(by Air or by Sea).
3.By your own forwarding agent.
){kind=link}