Trustplc Ctsc-200 Em253, 2-Axis 200kHz Pulse Output Positioning Control Module

• Customization: Available
• Task: Program
• Structure: Combination
• Model NO.: CTS7 253-1BH32
• Signal: Continuous
• Function: Automatic Control
• Certification: RoHS, ISO: 9001, CE
• Condition: New
• Customized: Customized
• Net Weight: 0.2kg
• Input/Output Points: 8di/8do
• Type of Output: NPN
• Input Type: PNP/NPN
• Pulse Frequency: 200kHz
• Transport Package: CTN
• Trademark: COTRUST
• Origin: China
• HS Code: 853710119
• Production Capacity: 10, 000 Pieces/Year

Product Description

 

Product Description

Order No.: CTS7 253-1BH32
Specification: 2 * 200KHz high-speed pulse output, PTO/PWM, 2 * 200KHz high-speed counting input, single-phase, A/B phase

 

Our Advantages

CTSC-200 series is a new generation of high-performance PLC with high cost-effective,excellent performance,multi-protocol communication ports and a abundant instruction,which can apply to various of industries and adapt to the complex control requirements of small and medium control system.

Powerful communication capability

Ethernet communication mode:10/100Mbps Ethernet support MODBUS_TCP and UDP_PP protocol.Multiple host networking communication in the LAN, to programming, debugging and remote monitoring in the WAN.

PPI communication mode:CTSC-200 series CPU integrated 1-2 PPI port which hardware interface is the RS485 or RS232,provide communication rate 9.6Kbps,19.2Kbps,187.5Kbps,PPI is token-ring network structure,can form PPI network without relay,to complete data exchange through NETR and NETW,each exchange package can be up to 200bytes,each CPU can connect eight modules,that is each CPU can connect to 8 PC or other CPU.

If the I/O of some system is relatively too large that one CPU can not meet requirement,can achieve by several CPU,multi-CPU structure can achieve distributed control thant with high sstem reliability.The data exchange is extremely fast and convenient because of the powerful communication capability among different CPUs.

MPI communication mode:CTSC-200 series CPU can connect to the MPI network,communication rate 19.2Kbps,187.5Kbps which only work as slave station in the MPI network.The different slave stations can not communication each other while the master stations can read the data of slave station.

Profibus-Dp or Ethernet communication mode:CPU can be connected to the Profibus field by by DP slave stations,as salve station of certain master station,it can exchange data fast and real-time also can run independently which with high reliability.

CPU can be connected with industrial Ethernet by Ethernet module which is suitable for building control or other applications with several stations.

CANopen communication mode:To form network through CAN communication,each CAN master station can connect 32 CAN slave stations or devices,baud rate up to 1MBit/s within 25m,baud rate up to 20MBit/s within 2500m.

Freeport communication mode:CPUs provide 1-2 freeport,embedded several free communication protocol library such as Modbus,USS etc.

CPU 226L,CPU226H with two freeport can communicate simultaneously so as to meet the requirements of such occasions like high-speed communication ,synchronous control,many peripherals.

 
 

General		24VDC input
Counts		8 inputs
Type		Drain /source (IEC type 1/drain)
Rated voltage		24 VDC on typical 5mA
Maximum constant voltage		30 VDC
Surge voltage		35 VDC last for 0.5 s
Logic 1(minimum)		15.6 VDC in 2.72mA (I0.0, I0.1, I0.2, I0.4, I0.5, I0.6) 12.8VDC in 2.55mA (I0.3, I0.7)
Logic 0(maximum)		15.4VDC in 2.69mA (I0.0, I0.1, I0.2, I0.4, I0.5, I0.6) 12.6 VDC in 2.51mA (I0.3, I0.7)
Input delay		< 1.1us (I0.0, I0.1, I0.2, I0.4, I0.5, I0.6) < 1ms  (I0.3, I0.7)
2-wire Bero Leakage current		1mA
Isolation(field to logic ) Optic(current) Isolation group		Yes 500 VAC, 1min Refer to diagram
High speed input rate HSC logic 1=16~26 VDC		200KHz(unipolar&bipolar) (I0.0, I0.4) 200KHz (A/B phase) (I0.0 and I0.1, I0.4 and I0.5)  (Input waveform duty cycle 40%~60%)
Simultaneous input		All
Maximum cable length	Unshielded	500 m standard input, 50m HSC input(use shield twisted pair and ground shielding)
	Shielded	300m standard input
Maximum turning frequency of HSC		50KHz

General	Transistor output
Counts	8 output
Type	Solid - MOSFET(drain)
Rated voltage	24 VDC
Output voltage range	5 to 28.8 VDC
Surge voltage	8A last for 100ms
Logic 1(minimum)	0.5V
Logic 0(maximum)	VCC-0.5V
Maximum rated current	0.5A
Maximum common port rated current	2.0A
Maximum leakage current	10μA
Maximum Lights power	3.5W
Induction clamp voltage	L+ - 48 VDC, 1W power
On resistance(junction)	0.3 Ωtypical (maximum 0.6Ω)
Isolation(field to logic ) Optic(electrical, field to logic) Logic circuit to junction Resistance(Logic circuit to junction) Isolation group	500 VAC, 1 min --- --- Refer to diagram
Maximum delay OFF to ON ON to OFF	0.2μs (Q0.0, Q0.1, Q0.2, Q0.3), 50μs (Q0.4, Q0.5, Q0.6, Q0.7) 0.2μs (Q0.0, Q0.1, Q0.2, Q0.3), 130μs (Q0.4, Q0.5, Q0.6, Q0.7) Note: The execution of the DO output instruction has a certain delay due to communication transmission: If the CPU is followed by single EM253 motion control module, the delay from enable to execution of the output instruction is about 780us. If there are up to 5 EM253 motion control modules hanging behind the CPU, the delay from enable to execution of the output instruction is about 930us.
Maximum pulse frequency	200KHz (Q0.0, Q0.2)
Mechanical life cycle	/
Contactor life	/
Output simultaneous	Output all in 55°C
Output parallel	Only simultaneous
Maximum cable length Shield Unshielded	500m 150m

I/O defined function

I0.0	I0.1	I0.2	I0.3		I0.4	I0.5	I0.6	I0.7
MC253_HSC0 pulse input	MC253_HSC0external direction signal	MC253_HSC0 reset signal	Motion axis 0 stop signal		MC253_HSC1 pulse input	MC253_HSC1 external direction signal	MC253_HSC1 reset signal	Motion axis 1 stop signal
Q0.0	Q0.1	Q0.2	Q0.3		Q0.4	Q0.5	Q0.6	Q0.7
Axis 0 pulse output	Axis 0 direction signal	Axis 1 pulse output	Axis 1 direction signal		Common output port

Attention: 
To use the EM253 module, you need to call the Hexin motion_ctrl_module.lib library function; 
The EM253 module DI/DO can be used as a regular digital quantity, but requires the use of the EM253 operation control library function. For example: DI control calls Em253_ READ-DI; DO control calls EM253-DO-CTRL; 
The EM253 module occupies the analog address, which is 4AI/4AQ, and when in use, it is necessary to clear the analog input filtering selection corresponding to this module in the system block.
 

Company Profile

FAQ

Q1.What's the payment term? 
A. We accept TT,LC,Western Union,Paypal.

Q2.What is the delivery time?
A. It depends on order quantity,usually it will take about 3-5 days for sample production.

Q3.What's the package used for?
A. For the small capacity,will use carton,but for big capacity,we should use honeycomb carton and pallet or wooden case for protection.

Q4.Would you accept to use our logo?
A.It's no problem,we accept OEM service.

Q5.What's your production capacity for one month?
A. Our month capacity can reach near 500-3000pcs for the most of our model.

Q6.Where is your market?
A. Our products are popular in Australia,South America,Philippines,Italy, America, Pakistan and so on.Some of them are our regular customers and some of them are developing. We hope you can join us and make mutural benifit from our cooperation.

Q7. What kind of certificates you have?
A. Our company has ISO9001,CE, RoHS,SGS etc.
 
OEM Services
Logo
Please offer us your own high resolution logo in JPG format,there should be two colors at most in the logo and there should be no gradient effect in the logo.
2. Label
Please offer us your own model numbers.

Lead Time
1.Sample orders will be delivered from our factory within 3-5 working days.
2.General orders will be delivered from our factory within 7-15 working days.
3.Large orders will be delivered from our factory within 45 working days at most.

Shipment
1.By EMS,DHL,FedEx,TNT,UPS or other Express.
2.By our forwarding agent(by Air or by Sea).
3.By your own forwarding agent.