Cotrust Em231 4 Analog Input Module Compatible Siemens PLC (231-0HC32)

• Customization: Available
• Task: Program
• Structure: Combination
• Model NO.: CTS7-231-0HC32
• Signal: Continuous
• Function: Automatic Control
• Certification: RoHS, ISO: 9001, CE
• Condition: New
• Customized: Customized
• Weight: 0.2kg
• Input Number of Points: 4ai
• Input Type: Voltage/Current
• Sampling Frequency: 500Hz
• Transport Package: CTN
• Specification: 71.2*80*62mm
• Trademark: COTRUST
• Origin: China
• HS Code: 853710119
• Production Capacity: 10, 000 Pieces/Year

Product Description

 

Product Description

Order No.: CTS7 2131-0HC32
Specification: TrustPLC CTSC-200 EM231 analog input module, current-voltage type, 4AI, 12BIT, Photoelectric isolation

 

Our Advantages

CTSC-200 series is a new generation of high-performance PLC with high cost-effective,excellent performance,multi-protocol communication ports and a abundant instruction,which can apply to various of industries and adapt to the complex control requirements of small and medium control system.

Powerful communication capability

Ethernet communication mode:10/100Mbps Ethernet support MODBUS_TCP and UDP_PP protocol.Multiple host networking communication in the LAN, to programming, debugging and remote monitoring in the WAN.

PPI communication mode:CTSC-200 series CPU integrated 1-2 PPI port which hardware interface is the RS485 or RS232,provide communication rate 9.6Kbps,19.2Kbps,187.5Kbps,PPI is token-ring network structure,can form PPI network without relay,to complete data exchange through NETR and NETW,each exchange package can be up to 200bytes,each CPU can connect eight modules,that is each CPU can connect to 8 PC or other CPU.

If the I/O of some system is relatively too large that one CPU can not meet requirement,can achieve by several CPU,multi-CPU structure can achieve distributed control thant with high sstem reliability.The data exchange is extremely fast and convenient because of the powerful communication capability among different CPUs.

MPI communication mode:CTSC-200 series CPU can connect to the MPI network,communication rate 19.2Kbps,187.5Kbps which only work as slave station in the MPI network.The different slave stations can not communication each other while the master stations can read the data of slave station.

Profibus-Dp or Ethernet communication mode:CPU can be connected to the Profibus field by by DP slave stations,as salve station of certain master station,it can exchange data fast and real-time also can run independently which with high reliability.

CPU can be connected with industrial Ethernet by Ethernet module which is suitable for building control or other applications with several stations.

CANopen communication mode:To form network through CAN communication,each CAN master station can connect 32 CAN slave stations or devices,baud rate up to 1MBit/s within 25m,baud rate up to 20MBit/s within 2500m.

Freeport communication mode:CPUs provide 1-2 freeport,embedded several free communication protocol library such as Modbus,USS etc.

CPU 226L,CPU226H with two freeport can communicate simultaneously so as to meet the requirements of such occasions like high-speed communication ,synchronous control,many peripherals.

Performance Parameters

Specification	EM231, 4 AI×12BIT
Physical Features
Dimensions(W×H×D)	71.2×80×62mm
Power Loss(dissipation)	2W
Power Consumption
From +5V(from I/O bus)	34 mA
From L+	40 mA
L+  voltage range,class 2 or DC sensor supply	20.4~28.8V DC
LED indicator	24 VDC Power Supply  Good            ON = no fault,            OFF = no 24 VDC power
Analog Input Feature
Number of analog input points	4 points
Isolation(field side to logic circuit)	Optical isolated: 500VAC, 1 minute
input type	Differential
Input Range
Voltage(unipolar)	0~10V, 0~5V
Voltage(bipolar)	±5V, ±2.5V
Current	0~20 mA
Data Range	15~30V
Bipolar,full-scale range	0~32000
Unipolar, full-scale range	-32000~32000
Input Resolution
Voltage(unipolar)	2.5 mV (0~10V) 1.25 mV (0~5V)
Voltage(bipolar)	2.5 mV (±5V) 1.25 mV (±2.5V)
Current	5μA (0~20mA)
Analog to digital conversion time	<300μs
Analog input step response	1.5ms
Common mode rejection	40dB,DC to 60Hz
Common mode voltage	Signal voltage + Common mode voltage < 12V
Input Impedance	≥10MΩ
Input filter attenuation	-3db @ 3.1kHz
Maximum input voltage	30V
Maximum input current	30mA
ADC resolution	12BIT

Calibration and the position of range switch
Input calibration
Because the calibration adjustment affects the OPAMP behind the analog multiplexer, it affects all user input channels.In addition, because the component parameters of the input channels in front of the multiplexer may differ, there is a slight difference of the same input signal on different channels even after calibration.
The input has been filtered in the module, so the measurements is stable. Start the analog input filter for all input of the module for better performance parameters. When calculating the average value, select the sampling times above 64.
Calibration steps:
1) Cut off external power of modules, configure DIP switch to select needed range.
2) Connect CPU with module power, wait for 15min above.
3) Use a transmitter, a voltage input source or a current input source to add the zero signal to module input.
4) Read measurement of the input in CPU.
5) Adjust GAIN potentiometer till the reading is 32000.
Range selection
The following table shows how to set the range of EM231 4AI with DIP switch. Use 1, 2and 3 to select the analogy input range which can be set to the same.
Attention: the unused DIP switch SW4 ~ SW6 must be set to OFF.

Unipolarity			Full scale input	Resolution
SW1	SW2	SW3
ON	OFF	ON	0 - 10V	2.5mV
	ON	OFF	0 -5V	1.25mV
			0 - 20mA	5 uA
Bipolar			Full scale input	Resolution
SW1	SW2	SW3
OFF	OFF	ON	± 5V	2.5mV
	ON	OFF	± 2.5 V	1.25mV

 

Company Profile

FAQ

Q1.What's the payment term? 
A. We accept TT,LC,Western Union,Paypal.

Q2.What is the delivery time?
A. It depends on order quantity,usually it will take about 3-5 days for sample production.

Q3.What's the package used for?
A. For the small capacity,will use carton,but for big capacity,we should use honeycomb carton and pallet or wooden case for protection.

Q4.Would you accept to use our logo?
A.It's no problem,we accept OEM service.

Q5.What's your production capacity for one month?
A. Our month capacity can reach near 500-3000pcs for the most of our model.

Q6.Where is your market?
A. Our products are popular in Australia,South America,Philippines,Italy, America, Pakistan and so on.Some of them are our regular customers and some of them are developing. We hope you can join us and make mutural benifit from our cooperation.

Q7. What kind of certificates you have?
A. Our company has ISO9001,CE, RoHS,SGS etc.
 
OEM Services
Logo
Please offer us your own high resolution logo in JPG format,there should be two colors at most in the logo and there should be no gradient effect in the logo.
2. Label
Please offer us your own model numbers.

Lead Time
1.Sample orders will be delivered from our factory within 3-5 working days.
2.General orders will be delivered from our factory within 7-15 working days.
3.Large orders will be delivered from our factory within 45 working days at most.

Shipment
1.By EMS,DHL,FedEx,TNT,UPS or other Express.
2.By our forwarding agent(by Air or by Sea).
3.By your own forwarding agent.