Cth3 C35-003s2, Cth300 PLC. Support Ethernet/IP Master Station, Support Modbus (RTU/TCP) Master/Slave, Support Single-Axis Motion.
Contact Supplier
Product Attributes
- Customization
- Available
- Function
- Automatic Control
- Certification
- RoHS, ISO: 9001, CE
- Model NO.
- CTH3 C35-003S2
- Condition
- New
- Customized
- Customized
- Material
- Plastic
- Product Model
- C35-03
- Order Number
- Cth3 C35-003s2
- Rated Input Voltage
- 24V DC
- Programming Software
- Codesys V3.5 (Sp18 Version)
- Programming Language
- Programming Language According to IEC61131-3: CFC/
- User Program Space
- 32m
- Power off Hold Space
- 64kb
- Maximum Number of Racks
- 4
- Ethercat Maximum Number of Extended Slav
- up to 128 Ethercat Slave Modules , Each Ethercat S
- Specification
- 34*115*101.6 (mm)
- Trademark
- COTRUST
- Origin
- China
- HS Code
- 85371011
- Production Capacity
- 50000pieces/Year
Product Images of Cth3 C35-003s2, Cth300 PLC. Support Ethernet/IP Master Station, Support Modbus (RTU/TCP) Master/Slave, Support Single-Axis Motion.
-
Cth3 C35-003s2, Cth300 PLC. Support Ethernet/IP Master Station, Support Modbus (RTU/TCP) Master/Slave, Support Single-Axis Motion. -
Cth3 C35-003s2, Cth300 PLC. Support Ethernet/IP Master Station, Support Modbus (RTU/TCP) Master/Slave, Support Single-Axis Motion. -
Cth3 C35-003s2, Cth300 PLC. Support Ethernet/IP Master Station, Support Modbus (RTU/TCP) Master/Slave, Support Single-Axis Motion. -
Cth3 C35-003s2, Cth300 PLC. Support Ethernet/IP Master Station, Support Modbus (RTU/TCP) Master/Slave, Support Single-Axis Motion. -
Cth3 C35-003s2, Cth300 PLC. Support Ethernet/IP Master Station, Support Modbus (RTU/TCP) Master/Slave, Support Single-Axis Motion.
Find Similar Products
Product Description
Order No.:CTH3 C35-003S2
Specification: 32MB program data space,64KB power-off hold data,55M expansion bus,24VDC power supply,2*RS485 port,1*EtherNET port,1*USB port,,1*CAN port,1 *EtherNET/EtherCAT port; Maximum number of racks :4 (including local racks) Support up to 128 EtherCAT slave stations and support CODESYS programming platform SP18 version.
|
Specification parameter |
Order number |
|
Basic model,32MB program data space,64KB power down hold data,55M expansion bus,24VDC power supply, 2*RS485 ports,1*EtherNET port,1*USB port,1*CAN port,1*EtherNET/EtherCAT port: supports visual WebVisu and OPC UA slave station, support EtherNet/IP master station, support MODBUS(RTU/TCP) master/slave, support single-axis motion,Maximum number of racks:4 (including local racks),support up to 128 EtherCAT slave stations, support CODESYS programming platform SP18 version. |
CTH3 C35-003S2 |
|
Product model |
C35-03 | ||||||||
|
Order numbe |
CTH3 C35-003S2 | ||||||||
|
Physical characteristics |
|||||||||
|
Size (WxHxD) |
34×115×101.6 mm | ||||||||
|
Power loss |
19.2W | ||||||||
|
Power supply characteristic |
|||||||||
|
Rated input voltage |
24V DC | ||||||||
|
Input voltage range |
20.4V~28.8V DC | ||||||||
|
Input current |
0.8A | ||||||||
|
Polarity reverse protection |
Yes | ||||||||
|
Bus power voltage |
+5V DC | ||||||||
|
Bus power current |
1.6A | ||||||||
|
LED indicator characteristics |
|||||||||
|
24V Power indicator (green) |
On: 24VDC power supply is normal; Off: No 24VDC power supply. |
||||||||
|
SF Indicator (red) |
On: The system is faulty. Off: no error. |
||||||||
|
BF indicator (red) |
On: The bus is faulty. Off: no error. |
||||||||
|
RUN indicator (green) |
On: The system is running. OFF: The system stops |
||||||||
|
STOP indicator (yellow |
On: The system stops. Off: The system is running |
||||||||
|
Ethernet indicator |
(Green) |
On: Connect; Off: No connection |
|||||||
|
(Yellow) |
On: 100Mbps; Off: 10Mbp |
||||||||
|
CAN port indicator |
(Green) |
On: Connected; Off: Not connected |
|||||||
|
(Yellow) |
On: 100Mbps; Off: 10Mbps |
||||||||
|
Instruction performance |
|||||||||
|
Bit instruction execution speed |
15ns | ||||||||
|
Floating point instruction execution speed |
45ns | ||||||||
|
Internal memory |
|||||||||
|
User program space |
32M | ||||||||
|
Power off hold space |
64KB | ||||||||
|
Data storage specification |
Zone I 32K, Zone Q 32K, zone M 512K |
||||||||
|
Integrated communication function |
|||||||||
|
Bus interface |
Support |
||||||||
|
USB port |
1 | ||||||||
| EtherNET port |
2(One of them is an EtherNET/EtherCAT switchable communication interface) |
||||||||
| RS485 port | 2 | ||||||||
| EtherCAT port | 1 | ||||||||
| CAN port | 1 | ||||||||
| EtherCAT port | |||||||||
|
Communication interface |
1*EtherCAT por |
||||||||
|
Baud rate |
100Mbps adaptive |
||||||||
|
Protocol type |
EtherCAT Interface protocol |
||||||||
|
Maximum cable length per section |
100m | ||||||||
|
Maximum number of sites |
Each master supports a maximum of 128 EtherCAT slave stations |
||||||||
|
Support function |
Support distributed clock configuration, redundancy Settings |
||||||||
|
Support startup parameter configuration |
|||||||||
|
Support PDO parameter configuration and mapping |
|||||||||
| Support for bus cycle configuration, configure startup check vendor ID and product ID | |||||||||
|
Isolate |
Yes | ||||||||
|
RS485 communication port |
|||||||||
|
Number of communication interfaces |
2,PORT0,PORT1 |
||||||||
|
Communication protocol |
Free port protocol (built-in MODbus-RTU protocol) |
||||||||
|
Free port baud rate |
Ranges from 1.2Kbps to 115.2Kbps |
||||||||
|
Maximum cable length per section |
Use isolation repeater: 1000m(115.2Kbps) 1200m(38.4 kbps) Isolation repeater not used: 50m |
||||||||
|
Maximum number of sites |
32 stations per segment, 126 stations per network. |
||||||||
|
Isolate |
Communication port isolation |
||||||||
| CANopen port | |||||||||
|
Communication interface |
CANopen | ||||||||
|
Maximum number of secondary sites |
32 | ||||||||
|
Protocol typ |
CANopen DS301 standard protocol |
||||||||
|
Support function |
Support automatic start CANopen Manager |
||||||||
| Support Optional slave polling | |||||||||
| Support starting the slave station | |||||||||
| Support NMT | |||||||||
| Support synchronous production | |||||||||
| Support synchronous consumption | |||||||||
| Support heartbeat generation | |||||||||
| Support activation time creation | |||||||||
|
Transmission rate (kbit/s) |
1000 | 800 | 500 | 250 | 125 | 50 | 20 | ||
|
Maximum length (m) |
25 | 50 | 100 | 250 | 500 | 1000 | 2500 | ||
|
Isolate |
Communication port isolation | ||||||||
| EtherNET port | |||||||||
|
Communication interface |
2*EtherNET ports (one of which is EtherNET/EtherCAT for switching communication) |
||||||||
|
Baud rate |
10/100Mbps adaptive |
||||||||
|
Protocol typ |
CODESYS custom protocol, based on UDP and TCP(Ethernet programming and CPU support |
||||||||
|
Maximum cable length per section |
100m | ||||||||
|
Maximum number of connections for a site |
UDP supports a maximum of 16 connections | ||||||||
|
Isolat |
Communication port isolation |
||||||||
|
Programming Software |
|||||||||
|
Programming package |
CODESYS V3.5 (SP18 version) |
||||||||
|
Programming language |
Programming language according to IEC61131-3: CFC/FBD/LD/IL/ST/SFC |
||||||||
|
Protection function |
|||||||||
|
Power supply protection |
The power supply terminal provides reverse protection and surge absorption functions |
||||||||
|
Interface protection |
Lightning protection for communication ports |
||||||||
|
Local I/O scalability |
|||||||||
|
Maximum number of racks |
4 | ||||||||
|
Maximum number of modules |
Host rack: 11 (power module, CPU, trunk module, 8 signal modules) Slave rack: 10 (power module, trunk module, 8 signal modules) |
||||||||
|
Remote I/O expansion capability |
|||||||||
|
CAN extended maximum number of master stations |
1 | ||||||||
|
CAN maximum number of slave stations |
Each master station connects to a maximum of 32 CAN slave stations. |
||||||||
|
EtherCAT maximum number of extended slaves |
Up to 128 EtherCAT slave modules , each EtherCAT slave module has a maximum of 8 signal modules | ||||||||
|
Supports motion control function |
|||||||||
|
Motion control function |
Do not support SoftMotion and CNC |
||||||||
|
Real-time clock |
|||||||||
|
Power off hold |
The power failure holding time is about 112 hours (typical value), and the power failure holding time can reach at least 1 year after the external battery is connected | ||||||||
|
Precision |
Monthly deviation <60 seconds |
||||||||
Power interface definition
|
4-pin removable terminals with 3.81mm spacing |
Symbol |
Signal definition |
|
|
L+ |
+24V power supply |
|
M |
+24V power ground |
|
|
|
Earth |
|
|
-- |
-- |
USB interface definition
|
USB interface |
Bit number |
Signal |
Signal definition |
|
|
1 |
V_BUS |
+5V power supply |
|
2 |
Data- |
Data- |
|
|
3 |
Data+ |
Data+ |
|
|
4 |
GND |
Earth |
EtherNET/EtherCAT interface definition
|
RJ45 network port |
Bit number |
Signal |
Signal definition |
|
|
1 |
TX+ |
Data sending end |
|
2 |
TX- |
Data sending negative end |
|
|
3 |
RX+ |
Data receiving terminal |
|
|
4 |
TERM |
-- |
|
|
5 |
TERM |
-- |
|
|
6 |
RX- |
Data receiving negative end |
|
|
7 |
TERM |
-- |
|
|
8 |
TERM |
-- |
|
|
Connector housing |
PE |
Casing grounding
|
|
|
Green lindicator |
As an indication of EtherNET/EtherCAT connection status |
||
|
Yellow indicator |
As an indication of EtherNET/EtherCAT speed status |
||
CAN interface definition
|
RJ45 network port |
Bit number |
Signal |
Signal definition |
|
1 |
CAN_H |
Data sending end |
|
2 |
CAN_L |
Data sending negative end |
|
|
3 |
-- |
-- |
|
|
4 |
-- |
-- |
|
|
5 |
-- |
-- |
|
|
6 |
-- |
-- |
|
|
7 |
CAN_GND |
CAN_GND |
|
|
8 |
-- |
-- |
|
|
Connector housing |
PE |
Casing grounding |
|
|
Green lindicator |
As an indication of the status of CAN data reception |
||
|
Yellow indicator |
As an indication of the status of CAN data transmission |
||
RS485 interface Definition
|
The Port0 port uses two detachable terminals with a 3-pin spacing of 3.81mm |
||
|
6-bit detachable terminal |
Signal
|
Signal definition |
|
|
A0 |
PORT0 port RS485 signal A |
|
B0 |
PORT0 port RS485 signal B |
|
|
SG |
PORT0 port RS485 signal GND |
|
|
A0 |
PORT0 port RS485 signal A |
|
|
B0 |
PORT0 port RS485 signal B |
|
|
SG |
PORT0 port RS485 signal GND |
|
Dip switch definition
|
Two-state switch |
Bit number |
Dip direction
|
Signal definition
|
|
|
ON |
UP |
System operation |
|
OFF |
Down |
System stop |
|
|
DIP switch |
Bit number |
Symbol
|
Signal definition
|
|
|
1 |
Term-PORT0 |
Terminal Resistance Switch 1 (PORT0) ON: terminal resistance; OFF: no terminal resistor |
|
2 |
NC |
Reserve |
|
|
3 |
NC |
Reserve |
Q1.What's the payment term?
A. We accept TT,LC,Western Union,Paypal.
Q2.What is the delivery time?
A. It depends on order quantity,usually it will take about 3-5 days for sample production.
Q3.What's the package used for?
A. For the small capacity,will use carton,but for big capacity,we should use honeycomb carton and pallet or wooden case for protection.
Q4.Would you accept to use our logo?
A.It's no problem,we accept OEM service.
Q5.What's your production capacity for one month?
A. Our month capacity can reach near 500-3000pcs for the most of our model.
Q6.Where is your market?
A. Our products are popular in Australia,South America,Philippines,Italy, America, Pakistan and so on.Some of them are our regular customers and some of them are developing. We hope you can join us and make mutural benifit from our cooperation.
Q7. What kind of certificates you have?
A. Our company has ISO9001,CE, RoHS,SGS etc.
Logo
Please offer us your own high resolution logo in JPG format,there should be two colors at most in the logo and there should be no gradient effect in the logo.
2. Label
Please offer us your own model numbers.
Lead Time
1.Sample orders will be delivered from our factory within 3-5 working days.
2.General orders will be delivered from our factory within 7-15 working days.
3.Large orders will be delivered from our factory within 45 working days at most.
Shipment
1.By EMS,DHL,FedEx,TNT,UPS or other Express.
2.By our forwarding agent(by Air or by Sea).
3.By your own forwarding agent.
About the Supplier
This supplier has been audited by TÜV Rheinland. Verify the report on the official TÜV Rheinland website with ID "MIC-ASR212546". Items marked "
" are certified.
){kind=link}
Company Profile
COTRUST Technologies Co., Ltd founded in 2003, is dedicated to R&D, manufacturing and sales of industrial automation control products. Relying on high quality, high performance automation control products and solutions to create maximum value for customers, determined to become the world's leading industrial automation solutions supplier.
As a high-tech enterprise, COTRUST provides a wide business coverage of intelligent equipment & robot, new energy vehicles, industrial Internet, smart factory. Main products include PLCs, Motion control&servo drive, HMI, VFD and automation software MagicWorks programming software (PLC/HMI/TUNER/OPC), the new launch MiCo remote solution, multi-robot cooperative control system widely used in customer solutions.
COTRUST built a long-term partnerships with customers. To achieve this, COTRUST offers more than just products: Working with COTRUST gives customers access to leading integrated manufacturing and R&D facilities, as well as highly skilled engineering and industry specialists.
COTRUST invests 10% of revenues and 40% of employees in R&D, owned more than 30 trademark registration and 79 patents with certificates( including invention, utility models and appearance). Uses a uniquely rigorous engineering process that incorporates advanced design modelling, performance analysis and quality assurance techniques for improve production capacity continuously and promote sustainable development.
On the basis of owning industrial automation technologies with proprietary intellectual property rights, COTRUST perseveres in industry marketing and providing total solution to customers in segment market and achieves growth of both enterprise value and customer value.
About Our Factory & Business Background
-
Business Type
- Manufacturer/Factory & Trading Company
- Address
- 9/F, Building 6A, Shenzhen International Innovation Valley, Nanshan District, Shenzhen 518055,China
-
Terms of Payment
- T/T
-
International Commercial Terms(Incoterms)
- FOB, CIF, CFR, EXW, FCA
-
Average Lead Time
-
Peak Season Lead Time: within 15 workdays
Off Season Lead Time: within 15 workdays -
Nearest Port
- Shenzhen Port
Our Production Capability & Technical Expertise
- Main Products
- PLC, Servo Drive, HMI, Distributed I/O, Variable Frequency Drive, Motion Controller, Touch Panel, VFD, Human Machine Interface, Frequency Inverter
-
Production Machines
- Solder Paste Printing Machine, SMT Machine, Reflow Soldering Machine, AOI Machine, Wave Soldering Machine, Spraying Machine, UV Dryer, SPI Machine, Laser Engraving Machine, Air Cooled High & Low Temperature Alternating Humidity & Heat Test Chamber, Salt Spray Tester, IV Curve Tester, Comprehensive Safety Test Instrument, Circuit & Component Fault Detection Analyzer, DC Low Resistance Tester, Secondary Tube Tester, X-RAY Machine, Oscilloscope
-
ODM Service Available
- Yes
-
OEM Service Available
- Yes
-
R&D Engineers
- 42 people
-
Own Brand
- Yes
Our Industry Experience & Global Business Record
-
Year of Establishment
- 2003-06-25
- Export Year
- 2008-10-01
-
Main Markets
- North America, Europe, Southeast Asia/ Mideast, Africa, East Asia(Japan/ South Korea), Domestic
-
Annual Export Revenue
- 5,000,000 RMB
-
Number of Foreign Trading Staff
- 2
-
Overseas Agent/Branch
- No
Our Certifications, Standards & Industry Recognition
-
Management System Certification
- Others
Send your message to this supplier
People who viewed this also viewed
-
-
-
-
-
US$20.00-40.00 / Piece
-
-
US$50.00-150.00 / Piece
-
-
US$166.00-235.00 / Piece
Product Categories
Find Similar Products By Category
- Supplier Homepage
- Products
- Electrical Control System
- Cth3 C35-003s2, Cth300 PLC. Support Ethernet/IP Master Station, Support Modbus (RTU/TCP) Master/Slave, Support Single-Axis Motion.
Related Categories
Hot Searches
- China Controller Factories
- Speed Controller Factories
- Electric Controller Factories
- Siemens PLC
- Mitsubishi Plc
- Plc Control Module
- Plc Controller Siemens
- Plc Monitor
- Plc Fiber
- Top 10 Controller
- Controller Trends
- PLC Bulkbuy